简介：RS SMA100B 射频和微波信号发生器
RS?SMA100B 射频和微波信号发生器提供卓越性能。在维持最高输出功率的同时提供最纯净的输出信号，远超竞争对手。作为优质的信号发生器，它可以完成射频半导体、无线通信以及航空航天和国防领域极苛刻的组件、模块和系统测试与测量任务。
主要特点：RS SMA100B 射频和微波信号发生器
频率范围介于 8 kHz 至 3 GHz、6 GHz、12.75 GHz、20 GHz、31.8 GHz、40 GHz、50 GHz 和 67 GHz（在过范围模式下最高达 72 GHz）
一流的 SSB 相位噪声：偏移值为 10 kHz 时，1 GHz 条件下为 ?152 dBc（典型值），10 GHz 条件下为 ?132 dBc（典型值）
几乎没有宽带噪声：10 GHz 条件下为 ?162 dBc（测量值），偏移值为 30 MHz
在宽频率范围内最大输出功率超过 30 dBm
极低的谐波
采用触摸显示屏的先进图形用户界面
规格：RS SMA100B 射频和微波信号发生器
>
| Frequency | ||
| Frequency range | RS?SMAB-B103 | 8kHz to 3GHz |
| RS?SMAB-B106 | 8kHz to 6GHz | |
| RS?SMAB-B112 | 8kHz to 12.75GHz | |
| RS?SMAB-B120 | 8kHz to 20GHz | |
| RS?SMAB-B131 | 8kHz to 31.8GHz | |
| RS?SMAB-B140/-B140N | 8kHz to 40GHz | |
| RS?SMAB-B150/-B150N | 8kHz to 50GHz | |
| RS?SMAB-B167/-B167N | 8kHz to 67GHz (overrange up to 72 GHz) | |
| Level | ||
| Maximum specified output power (PEP) | RS?SMAB-B103/-B106 | |
| standard | ||
| f = 3GHz | +19dBm | |
| f = 6GHz | +19dBm | |
| with RS?SMAB-K31 | ||
| f = 3GHz | +25dBm | |
| f = 6GHz | +25dBm | |
| with RS?SMAB-K31 and RS?SMAB-B32 | ||
| f = 3GHz | +30dBm | |
| f = 6GHz | +30dBm | |
| RS?SMAB-B112/-B120 | ||
| standard | ||
| f = 12.75GHz | +18dBm | |
| f = 20GHz | +17dBm | |
| with RS?SMAB-K33 | ||
| f = 12.75GHz | +20dBm | |
| f = 20GHz | +20dBm | |
| with RS?SMAB-K33 and RS?SMAB-B34 | ||
| f = 12.75GHz | +27dBm | |
| f = 20GHz | +24dBm | |
| RS?SMAB-B131/-B140/-B140N | ||
| standard | ||
| f = 31.8GHz | +13dBm | |
| f = 40GHz | +13dBm | |
| with RS?SMAB-B35 | ||
| f = 31.8GHz | +17dBm | |
| f = 40GHz | +16dBm | |
| with RS?SMAB-B35 and RS?SMAB-K36 | ||
| f = 31.8GHz | +22dBm | |
| f = 40GHz | +19dBm | |
| RS?SMAB-B150/-B150N/-B167/-B167N | ||
| standard | ||
| f = 50GHz | +5dBm | |
| f = 67GHz | +5dBm | |
| with RS?SMAB-B37/-B39 | ||
| f = 50GHz | +11dBm | |
| f = 67GHz | +9dBm | |
| with RS?SMAB-B37/-B39 and RS?SMAB-K38/-K40 | ||
| f = 50GHz | +18dBm | |
| f = 67GHz | +10dBm | |
| Spectral purity | ||
| SSB phase noise | f = 1GHz, 1Hz measurement bandwidth | |
| standard, carrier offset = 20 kHz | -135dBc, ?140dBc (typ.) | |
| with RS?SMAB-B709, carrier offset = 10 kHz | -140dBc | |
| with RS?SMAB-B710(N), carrier offset = 10 kHz | -140dBc, ?145dBc (typ.) | |
| with RS?SMAB-B711(N), carrier offset = 10 kHz | -147dBc, ?152dBc (typ.) | |
| SSB phase noise (continued) | f = 10GHz, 1Hz measurement bandwidth | |
| standard, carrier offset = 20 kHz | ?115dBc, ?120dBc (typ.) | |
| with RS?SMAB-B709, carrier offset = 10 kHz | -120dBc | |
| with RS?SMAB-B710, carrier offset = 10 kHz | ?120dBc, ?125dBc (typ.) | |
| with RS?SMAB-B711, carrier offset = 10 kHz | ?128dBc, ?132dBc (typ.) | |
| Harmonics | ||
| Instruments equipped with RS?SMAB-B103/-B106 and RS?SMAB-K31/-B32 options | 10 MHz f ≤ 6 GHz, P = 18 dBm | -60 dBc |
| Instruments equipped with RS?SMAB-B112/-B120 and RS?SMAB-K33/-B34 options | 10 MHz f ≤ 20 GHz, P = 16 dBm | -55 dBc |
| Instruments equipped with RS?SMAB-B131/-B140(N)/-B150(N)/-B167(N) and RS?SMAB-B35/-K36/-B37/-K38/-B39/-K40 options | 10 MHz f ≤ 31.8 GHz, P = 13 dBm | -55 dBc |
| Nonharmonics | f = 1 GHz, > 10 kHz from carrier, 10 dBm | -92 dBc |
| f = 1 GHz, > 10 kHz from carrier, 10 dBm with RS?SMAB-B711(N) option | -100 dBc | |
| Supported modulation modes | with RS?SMAB-K720 option | AM, FM, φM |
| Pulse modulation | with RS?SMAB-K22 option | |
| Rise/fall time | RS?SMAB-K22, f > 700 MHz | 10ns, 5 ns (typ.) |
| On/off ratio | RS?SMAB-K22 | >80 dB |
| Minimum pulse width | RS?SMAB-K22 | 20ns |